Primerapid

Classification Type GP CS IV Wc1

Anchoring mortar for quick repairs and fixings, indoors and outdoors

Packaging

24 kg box (16 bags x 1.5 kg)

Color

Gray

Description 


Fast-hardening and fast-setting anchoring mortar, Type GP CS IV Wc1, suitable for carrying out quick fixings and repairs on concrete and masonry supports, indoors and outdoors.

EN 998-1:2016

Properties


It has good workability and improved mechanical resistance in the first few hours. As it sets quickly, it allows fixings to be made in a shorter time.


Composition


It has good workability and improved mechanical resistance in the first few hours. As it sets quickly, it allows fixings to be made in a shorter time.


Support


It has good workability and improved mechanical resistance in the first few hours. As it sets quickly, it allows fixings to be made in a shorter time.


Application instructions



  • Before mixing the mortar with water, pre-wet the supports and anchors.
  • Knead the dry mixture with clean water (180 ml of water/kg of powder) to obtain a homogeneous, lump-free mortar, in accordance with the proportion specified in the technical data.
  • The mortar has a very short workability time – 2 to 3 minutes (20ºC), so it should be applied quickly. We recommend that the quantity of mortar to be prepared is in accordance with the time mentioned. When preparing large quantities, it is advisable to use a low-speed mixer.
  • The addition of other products may compromise the characteristics of the mortar.
  • The addition of water and/or forced mixing of the mortar after it has started to set causes the loss of initial strength and the extension of its curing time.
  • Use a trowel, spoon and, in difficult-to-reach cases, gloves. In general, pre-fill the hole with mortar, insert the object to be fixed and quickly fill the entire area.
  • In the case of large objects or those that are difficult to immobilize, position and support them beforehand.
  • To contain water leaks, knead the mortar and when it starts to set, press it against the leak area until it hardens.

Declaration of performance Safety data sheet Technical sheet

Technical Data

Application:

Indoor/Outdoor

Operating Temperatures:

5ºC to 30ºC

Recommended layer thickness:

5 to 20 mm

Time of use of fresh mortar:

» 2 minutes (depending on environmental conditions)

Open Time:

≤ 5 minutes

Commissioning Time:

Min. 2 Hours

Consumption:

17 kg POWDER / (m2 X cm thickness)

Mixing Ratio:

180 ml of Water / Kg of Powder

Flammability:

Non-flammable

Specific Weight of Hardened Mortar:

1,70 Kg/dm3

Dry Residue:

100%

Volumetric/Weight Mixing Ratio:

0.165 dm3 of Water/Kg of Powder

Specific Weight of Fresh Mortar:

2 Kg/dm3 pH: 13

Compressive Strength (1 HOUR):

≥ 3 MPA

Compressive Strength (28 DAYS):

≥ 15 MPA

Flexural Strength (28 DAYS):

≥ 2,5 MPA

Packaging:

20 kg box (4 bags of 5 kg), 25 kg bag, 24 kg box (16 bags of 1.5 kg)

Cleaning:

water

Storage:

1 year from the date of production, in closed original packaging and protected from heat and humidity.

CE Marking Data

Reaction to fire:

Class A1

Flexural strength:

≥ 2,5 MPA

Compressive Strength (28 Days):

CS IV

Compressive Strength (24 Hours):

CS IV

Water absorption by capillarity:

Wc1

Thermal Conductivity (Tabled value:)

0,83 / 0,93 W/mºK

Durability :

Validated by declared performance classes

Receive additional information